Manufactured by sintering a selected diamond crystal with a metal matrix into a steel shank. The point of the set diamond is concentric with the shank.   Used for dressing and truing conventional abrasive wheels. Used for rough dressing and truing. Diamond re-setting and repair service are available on request.                      unit: mm   SDD-1A01 SDD-1A02 SDD-1A03 Code No L D Code No L D S E Code No D(pich) L S E 1a01 - 01 100 12 1a02 - 01 50 10 1.5 2 1a13 - 01 M8 * 1.0 16 1.0 2 1A01 - 02 88 12 1A02 - 02 40 10 1.5 2 1a13 - 02 M8 * 1.25 40 1.0 2 Note Please specify L and D. Note Please specify L,D,S and E. Note Please specify D (Pich), L, S and E.   SDD- 1A01 SDD- 1A02 Code No L1 L2 L3 D1 D2 D3 W Code No L1 L2 D1 D2 V 1A09- 01 60 12 42 18 12 10 16 2A10- 01 42 25 12 8 90 1A09- 02 57 12 42 18 12 10 16 2A10- 02 35 19 15.8 11.1 100 Note Please specify L and W. Note Please specify L, D, and V.   SDD- 2A12 SDD- 2A13 Code No L1 L2 L3 D1 D2 V Code No L1 L2 D1 D2 V W 2A12-01 43 22 8 10 8 60 2A13-01 37 22 16 11 90 14 2A12-02 38 22 8 10 8 90 2A13-02 29 17 12 8 90 11 Note Please specify L, D and V. Note Please specify L, D, V and W.   SDD- 2A14 SDD- 2A18 Code No L1 L2 L3 L4 D1 D2 D3 V Code No L1 L2 L3 D1 D2 V W 2A14-01 34 19 8 6 16 11 10 90 2A18-01 29 15 16 11 90 14 14 2A14-02 29 19 10 4 12 10 9 90 2A18-02 29 16 12 8 90 11 11 Note Please specify L, D and V. Note Please specify L, D, V and W.